STM32L011E4Y6 ST Mainstream Arm Cortex-M0+ Ultra-Low-Power 32-bit MCU 16KB Flash 2KB SRAM EEPROM ADC WLCSP-25

STM32L011E4Y6 Product Overview

STM32L011E4Y6 is a Cortex-M0+ MCU at 32 MHz, WLCSP-25. 16 KB Flash, 2 KB SRAM, 512B EEPROM, 12-bit ADC (6 ch), LP timers, RTC, 1×USART, 1×SPI, 1×I2C. Up to 11 I/Os. 1.65–3.6 V, -40–85 °C. As a value-line member of the STM32L0 series, it delivers 32-bit performance at exceptionally low power and cost, optimized for battery-powered, extremely space-constrained IoT nodes and portable applications with its ultra-small WLCSP package.

STM32L011E4Y6 Core Features

Core: Cortex-M0+ 32 MHz, low-power design

Memory: 16 KB Flash, 2 KB SRAM, 512B EEPROM

Analog: 12-bit ADC (6 ch)

Connectivity: 1×USART, 1×SPI, 1×I2C

Timers: LP Timer, GP Timers, RTC

I/Os: 11

Package: WLCSP-25

Temperature Range: -40°C to 85°C

STM32L011E4Y6 Applications

IoT Sensor Nodes: Battery-powered micro environmental sensors, wireless modules

Portable Devices: Wearables, portable medical devices

Industrial Metering: Water, gas, and electricity meters

Consumer Electronics: Remote controls, e-labels, smart cards

Extreme Space-Constrained Energy Harvesting: Self-powered systems using energy harvesting

STM32L011E4Y6 Key Advantages

Ultra-Low Power: Multiple low-power modes extend battery life

Integrated EEPROM: Eliminates external storage for data logging

32-bit Performance, 8-bit Price: Enjoy the ARM ecosystem at a very low cost

Ultra-Small WLCSP-25 Package: Only 2.5×2.5mm, saves maximum PCB space

Wide Operating Voltage: 1.65–3.6V, flexible for battery-powered applications

Full Ecosystem Compatibility: Easy development with STM32CubeIDE/HAL/LL libraries

Why Choose QIXINWEI

Years of experience in the electronics industry. Trusted by global customers.

Massive In-Stock Inventory – Ready to ship promptly.

BOM Matching Service – One-stop solution, save time.

PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs.

Cost-Effective & Efficient – Better channel, better cost.

A dedicated team makes your procurement smoother.

Contact us for BOM quotes or PCBA inquiries.

FAQ

1. What is STM32L011E4Y6 and what is its standout feature?
STM32L011E4Y6 is an ultra‑miniature, ultra‑low‑power 32‑bit MCU from STMicroelectronics' STM32L0 series, based on an Arm® Cortex®‑M0+ core in a WLCSP‑25 wafer‑level chip‑scale package measuring just about 2 mm × 2 mm. Operating at 32 MHz, it packs 16 KB Flash, 2 KB SRAM, and 512 bytes of hardware EEPROM, along with a 12‑bit ADC and a low‑power UART. By squeezing a complete MCU system into a nearly bare‑die‑sized footprint, it is purpose‑built for battery‑powered devices with extreme PCB area and thickness constraints, such as wearable patches, micro IoT nodes, and disposable medical sensors.

2. What are the key specifications of STM32L011E4Y6?

• Core: Arm® Cortex®‑M0+, up to 32 MHz

• Memory: 16 KB Flash, 2 KB SRAM, 512‑byte EEPROM

• Operating Voltage: 1.65 V to 3.6 V

• Temperature Range: -40 °C to +85 °C (industrial grade)

• I/O Count: up to 20

• Package: WLCSP‑25 (approx. 2 mm × 2 mm)

3. The WLCSP‑25 package is only about 2 mm × 2 mm. How do you solder it? Is it suitable for low‑volume production?
The WLCSP (Wafer‑Level Chip‑Scale Package) has solder balls directly on the chip surface and is extremely tiny. It requires high‑precision reflow soldering equipment and stencils; manual soldering with an iron is impossible. This package is intended for fully automated high‑volume SMT assembly to maximize PCB space and thickness savings. For prototyping, it is strongly recommended to first develop and debug your code on a compatible LQFP‑packaged board such as the NUCLEO‑L031K6, and only transition to the WLCSP for volume production. Manual assembly or small‑batch hand‑placement is extremely difficult and not recommended.

4. Why choose STM32L011E4Y6 over STM32L011F4P6 or other package variants? What are the differences?
The key difference is the package form factor and size. E4Y6 uses WLCSP‑25 (~2 mm × 2 mm), the smallest option in the L011 family, targeting applications with extreme space and thickness limitations. F4P6 uses a TSSOP‑20 (6.5 mm × 4.4 mm), which is easy to hand‑solder but occupies more board area. Both share identical core, memory, and peripherals. If your product has strict space constraints and is produced in high volume, E4Y6 is the ideal choice; if you need to prototype by hand or produce small batches, F4P6 is far more practical.

5. Can 16 KB Flash and 2 KB SRAM meet real project needs? What kind of programs can they run?
This memory configuration is aimed at highly optimized bare‑metal firmware. 16 KB Flash can hold compact sensor drivers, LPUART communication routines, and basic control logic. 2 KB SRAM requires very careful variable management, but is entirely adequate for single‑function applications—for example, reading a sensor value, transmitting it over UART, and entering deep sleep. Additionally, the on‑chip 512‑byte hardware EEPROM can store configuration parameters or calibration data, eliminating the need for an external memory chip and further simplifying the system.

6. What practical use does the built‑in 512‑byte EEPROM provide?
This hardware EEPROM supports byte‑level write operations and offers high endurance, making it ideal for retaining serial numbers, calibration coefficients, sensor offsets, or small data logs across power cycles. Compared to emulating EEPROM in flash, it is simpler, more reliable, and does not consume valuable program memory. In tiny battery‑powered devices, this feature removes the need for an external non‑volatile memory chip, saving both cost and PCB space.

7. How low is its power consumption? What are the typical currents in different modes?

• Temperature Range: -40 °C to +85 °C

• Ultra‑low‑power modes:

  • Standby mode: ~0.27 µA (no RTC)

  • Stop mode: ~0.4 µA (no RTC), ~0.8 µA with RTC

  • Run mode: ~88 µA/MHz

8. Can the ADC and communication interfaces still be used with only 20 I/Os in the WLCSP package? Won't there be pin shortages?
Despite the tiny package, the chip brings out enough I/Os, including multiple ADC input channels and the full signal set for 1× SPI, 1× I²C, and 1× low‑power UART (LPUART). The LPUART can remain operational in Stop mode and wake the MCU upon activity, making it excellent for periodic communication in ultra‑low‑power designs. Because of the limited pin count, some functions may require multiplexing; it is recommended to use STM32CubeMX to plan your pin assignments in advance to ensure all required peripherals can be used without conflict.

9. What development tools are needed for the STM32L011E4Y6? Is there a beginner‑friendly evaluation board?
ST provides free STM32CubeMX and STM32CubeIDE, along with the STM32CubeL0 firmware library. Debugging and programming use an ST‑Link debugger. While there is no evaluation board directly featuring the WLCSP E4Y6, you can use the NUCLEO‑L031K6 (LQFP‑32) or a board with an L011F4P6 for software development. These boards share the same core and peripherals as the E4Y6; after development, simply switch the target device to E4Y6 in CubeMX and adjust the pin configuration to seamlessly migrate your code.

10. What upgrade options are available if I later need more memory or richer peripherals?
If 16 KB Flash or 2 KB SRAM becomes insufficient, you can consider migrating to a WLCSP variant in the STM32L031 series (32 KB Flash, 8 KB SRAM) while retaining a similar tiny footprint. For more I/Os or communication interfaces, LQFP‑packaged STM32L051 devices are a good next step. All these migration paths stay within the unified STM32Cube ecosystem, allowing extensive code reuse—only the device selection and pin configuration need to be updated in the tools.