STM32F100VCT6 ST Mainstream Arm Cortex-M3 Value Line 32-bit MCU 256KB Flash 24MHz CPU ADC DAC FSMC LQFP-100

STM32F100VCT6 Product Overview

The STM32F100VCT6 is a mainstream Arm Cortex-M3 value line MCU from STMicroelectronics, LQFP-100 package (14×14×1.4 mm). 24 MHz Cortex-M3 core, 256 KB Flash, 24 KB SRAM. Integrates FSMC (Flexible Static Memory Controller supporting SRAM, PSRAM, NOR), LCD parallel interface (8080/6800 modes), 12-bit ADC (16 channels, 1.2 µs), 12-bit DAC (2 channels), HDMI CEC, temperature sensor, 12-channel DMA, up to 12 timers (1×16-bit 6-ch advanced-control/PWM/deadtime/emergency stop, up to 9×16-bit GP/IC/OC/PWM/pulse counter/quadrature encoder, 2×16-bit basic timers for DAC, independent/window WDG, 24-bit SysTick), up to 2×I2C (SMBus/PMBus), up to 3×USART (ISO 7816/LIN/IrDA/modem control), up to 3×SPI (12–18 Mbit/s). 80 I/Os (all mappable on 16 ext. interrupt vectors, almost all 5V-tolerant). VDD 2.0 V–3.6 V, -40 °C to 85 °C, ECOPACK®2.

STM32F100VCT6 Core Features

Core: Arm Cortex-M3 24 MHz, 1.25 DMIPS/MHz, single-cycle multiplication/hardware division, SWD & JTAG debug Memory: 256 KB Flash, 24 KB SRAM, CRC, 96-bit unique ID FSMC Controller: Supports SRAM, PSRAM, NOR Flash, 4 chip selects LCD Parallel Interface: 8080/6800 modes for direct LCD module connection 12-bit ADC: 16 channels, 1.2 µs, 0–3.6 V, temperature sensor 12-bit DAC: 2 channels, buffered output HDMI CEC: Consumer electronics control interface 12-ch DMA: Supporting timers, ADC, DAC, SPI, I2C, USART Up to 12 Timers: 1×16-bit 6-ch advanced-control/PWM/deadtime/emergency stop, up to 9×16-bit GP/IC/OC/PWM/pulse counter/quadrature encoder, 2×16-bit basic timers (for DAC), independent/window WDG, 24-bit SysTick Communication: Up to 2×I2C (SMBus/PMBus), up to 3×USART (ISO 7816/LIN/IrDA/modem control), up to 3×SPI (12–18 Mbit/s) Low Power: Sleep/Stop/Standby, VBAT for RTC and backup registers Clock: 4–24 MHz XTAL, 32 kHz RTC XTAL (calibrated), 8 MHz RC (factory-trimmed), 40 kHz RC, PLL I/Os: 80 fast I/Os, all mappable on 16 ext. interrupt vectors, almost all 5V-tolerant Supply/Temp: VDD 2.0 V–3.6 V, POR/PDR/PVD, -40 °C to 85 °C Package: LQFP-100 (14×14×1.4 mm), Tray

STM32F100VCT6 Applications

Industrial: PLCs, sensor transmitters, inverters, printers, motor drive & control Motor Control: Fans, pumps, small motors (6-ch PWM/deadtime/emergency stop/quadrature encoder) Medical: Handheld medical terminals, health monitoring devices, patient monitoring systems Consumer: Remote controls, handhelds, PC peripherals, GPS platforms, gaming peripherals Home Appliances: Panels, HVAC, alarms, video intercoms, smart home control Security: Access control, alarms, smoke detectors IoT: Wireless sensors, environmental monitoring, agriculture tech, smart cities LED Lighting: Dimming, RGB strips, SMPS Automotive: Vehicle light control, window anti-pinch, automotive sensor nodes (non-safety-critical)

STM32F100VCT6 Key Advantages

Arm Cortex-M3 Core: 24 MHz, 1.25 DMIPS/MHz, single-cycle multiplication/hardware division, far exceeding Cortex-M0 performance at same frequency FSMC + LCD Parallel Interface: Supports external SRAM/PSRAM/NOR Flash and direct LCD connection — premium peripherals exclusive to 100-pin+ packages 256 KB Flash + 24 KB SRAM: Among the largest memory configurations in the STM32F100 series for complex protocol stacks and algorithms LQFP-100 Package: 14×14 mm, 80 I/Os, extremely rich I/O resources 12-bit ADC + 12-bit DAC (2-ch): Complete analog signal chain without external analog ICs 12-bit DAC (2-ch): Buffered output, rare in this class HDMI CEC: For digital TV, A/V receivers, and consumer electronics 12-ch DMA: Direct peripheral-to-memory transfers, offloads CPU 12 Timers: Advanced-control/PWM/deadtime/emergency stop/quadrature encoder + 9 GP timers/pulse counter + basic timers for DAC Calendar RTC: VBAT backup, ideal for scheduled sensing and low-power applications Mature STM32 Ecosystem: CubeIDE/CubeMX/HAL/LL libraries, abundant development boards and reference designs Cost-Effective Value Line: 32-bit ARM + ADC + DAC + FSMC + LCD, ideal upgrade from 8/16-bit MCUs

Why Choose QIXINWEI

Years of experience in the electronics industry. Trusted by global customers.

Massive In-Stock Inventory – Ready to ship promptly

BOM Matching Service – One-stop solution, save time

PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs

Cost-Effective & Efficient – Better channel, better cost

A dedicated team makes your procurement smoother.

Contact us for BOM quotes or PCBA inquiries

FAQ:

1. What is the STM32F100VCT6 and what does the "Value Line" designation mean?
   The STM32F100VCT6 is a 24 MHz Arm Cortex‑M3 microcontroller with 256 KB Flash and 24 KB SRAM, housed in an LQFP‑100 package. It belongs to the STM32F100 “Value Line” family, which is specifically designed to bring 32‑bit processing power to cost‑sensitive applications previously dominated by 8‑ or 16‑bit MCUs. Compared to the mainstream STM32F103 series, the Value Line optimizes for low cost and low power by reducing the maximum CPU frequency, removing the USB, CAN, and FSMC peripherals, and offering a competitive price point. This makes the F100VCT6 an ideal upgrade path for designs that have outgrown 8‑bit MCUs but do not require the full feature set of the F103.

2. How does the STM32F100VCT6 differ from the popular STM32F103VCT6? What are the main trade‑offs?
   Both share the same Cortex‑M3 core and LQFP‑100 package. The key differences are: the F100VCT6 runs at a maximum of 24 MHz (vs 72 MHz on the F103), has no USB, no CAN, no FSMC external memory bus, and a smaller SRAM (24 KB vs 48 KB). In exchange, the F100 offers a significantly lower cost and reduced dynamic power consumption. It also retains essential peripherals: 3× USART, 2× SPI, 2× I2C, a 12‑bit ADC, and a 12‑bit DAC (which is absent on most F103 variants). Choose the F100VCT6 when you need a high I/O count, analog output, and a proven 32‑bit core without the extra cost of high‑speed peripherals you will never use.

3. What are the advantages of the 256 KB Flash and 24 KB SRAM in a 24 MHz MCU? Is this combination useful?
   This generous Flash size allows you to store complex firmware, multiple communication stacks, lookup tables, and even graphical fonts without external memory. The 24 KB SRAM is sufficient for moderate data buffering and task stacks. This combination is perfect for applications that are relatively slow in terms of CPU speed but need substantial code storage—such as building automation controllers, smart meters, and industrial alarm panels—where the MCU spends most of its time in low‑power sleep and only wakes occasionally to process and report data. The large Flash also supports future over‑the‑air updates without immediately running out of space.

4. Why would I choose the STM32F100VCT6 over an 8‑bit MCU or a newer STM32G0 series chip?
   You choose the F100VCT6 when you need a mature, proven 32‑bit architecture with extensive community support, long‑term availability, and a high I/O count at a very low cost. Compared to an 8‑bit MCU, the Cortex‑M3 core provides far more processing headroom and better C/C++ development efficiency without a large price increase. Compared to the newer STM32G0 series, the F100VCT6 is often more cost‑effective for designs that do not need USB‑PD, advanced analog features, or ultra‑low power modes. If your firmware is already written and validated on the STM32F1 ecosystem, the F100VCT6 is a drop‑in, low‑risk choice.

5. Does the STM32F100VCT6 have a DAC? How does its analog capability compare to the F103?
   Yes, the STM32F100VCT6 includes two 12‑bit DAC channels, which are absent on most STM32F103 models (except the F103xD/E high‑density devices). This makes the F100VCT6 an attractive option for applications that need analog voltage outputs—such as waveform generation, sensor excitation, or audio playback—without adding an external DAC chip. Combined with its 16‑channel 12‑bit ADC, the F100VCT6 provides a solid analog front‑end for mixed‑signal applications at a very low cost.

6. Can the STM32F100VCT6 run multiple UART, SPI, and I2C interfaces simultaneously on its 100‑pin package?
   Yes, with up to 80 I/O pins, the VCT6 can easily accommodate 3× USART, 2× SPI, 2× I2C, the DAC outputs, and still have plenty of GPIOs left for other functions. The absence of FSMC, USB, and CAN frees up many pins that would otherwise be occupied by these peripherals, giving you more flexibility for general‑purpose I/O. STM32CubeMX helps you verify the exact pin‑multiplexing for your configuration.

7. Is 24 MHz enough for real‑time control and serial communication? Will I miss the 72 MHz of an F103?
   For many real‑world applications, 24 MHz is more than adequate. It can easily handle UART, SPI, and I2C communication at standard baud rates, perform ADC sampling at several hundred ksps, and run simple PID control loops. The Cortex‑M3 core at 24 MHz still outperforms most 8‑ and 16‑bit MCUs. You will only feel the speed limitation if you need to process complex algorithms, run a full TCP/IP stack (which typically requires an Ethernet MAC anyway), or execute high‑speed DSP. For everything else, the F100VCT6 delivers a responsive, real‑time experience with lower power consumption and lower cost than a 72 MHz F103.

8. What low‑power modes does the STM32F100VCT6 support, and is it suitable for battery‑powered devices?
   The chip supports Sleep, Stop, and Standby modes. In Stop mode with the main regulator off and all 24 KB SRAM retained, the typical current is around 14 µA. Wake‑up from Stop is fast enough to respond to external interrupts. The 24 MHz clock and the Value Line’s power‑optimized design contribute to very low dynamic power consumption. This makes the F100VCT6 an excellent choice for battery‑powered sensors, portable instruments, and field data loggers that spend most of their time in deep sleep and wake up periodically to acquire and transmit data.

9. Can I perform over‑the‑air (OTA) firmware updates with the 256 KB single‑bank Flash?
   Yes, the 256 KB Flash is ideal for OTA implementations. You can partition it into a bootloader, an active application area, and a download buffer. A typical split reserves 16–32 KB for the bootloader, leaving over 200 KB for the application. The 24 KB SRAM can temporarily hold the new firmware image received via USART, SPI, or an external wireless module. A CRC or signature check ensures a safe update. An A/B scheme with two 120 KB slots is also possible, giving you full fail‑safe update capability without any hardware changes.

10. What are the most typical applications for the STM32F100VCT6?
    It is widely used in building automation controllers, smart meters, industrial alarm panels, home appliances, portable medical devices, and cost‑sensitive sensor hubs. Any application that needs a proven 32‑bit core, a large on‑chip Flash, analog output via DAC, and a high I/O count at the lowest possible system cost is a strong fit for the F100VCT6. Its Value Line positioning makes it a perennial favorite for high‑volume, price‑conscious products that still demand the reliability of the STM32 ecosystem.